Construction Site Dangers to Be Aware of

According to OSHA and various other sources, construction is responsible for approximately 4% of the gross domestic product in the United States. Building industry workers have a median pay of approximately $25-30 per hour, according to experience, geographical location and their skill sets. This profession, however is one of the most dangerous profession in the United States, with injury or fatality rates being anywhere from 10-20% of the workforce, depending on the source.

Three of the immediate safety risks inherent to the job are: falls, being struck by or trapped in between objects, and becoming overexerted or suffering a repetitive motion injury. With proper measures and adherence to safety laws and company procedures to address safety precautions on an active construction site, the risks to individual workers can be decreased drastically in these three areas of concern.

There are other safety issues which come up as one explores more about the industry and seeks to reduce other injuries and hazards. After looking at OSHA statistics, it is apparent there are more Hispanic and Latino workers injured per capita than those of other ethnic backgrounds. In some studies, the rate of Latino or Hispanics injured on an active construction site are almost double that of other workers. While this might be seen initially as a scenario of these workers being assigned more dangerous tasks, it simply might be something as easy as language barriers which could impede understanding of the safety policies and procedures or a delay in comprehension of warnings given by co-workers.

In many cases, there are risks to the public that are also element of an active construction site. Proper barriers should be in place to stop the curious (and usually inebriated) explorer from entering the site either during working hours or after the site is closed for the afternoon. Having all of your construction site debris disposed of into 20 yard dumpsters like Centex Dumpster Rental in Austin, Tx. Having the site properly secured is a “no brainer” to many, but there are still those construction wannabes who find a way to get themselves into trouble – especially young adults.

Most accidents on a construction site are simply that – accidents. Most companies simply take construction site safety very seriously and enforce all local laws as well as OSH guidelines. The best of the batch will work to exceed the bare minimum and look for approaches to protect their work force, most people and the environment as well as they build, remodel and repair structures.…

Continue Reading →

Current Trends in Construction Site Safety

There are numerous factors which are thought to be the common factors of construction site accidents. When a construction safety educator enters a classroom, he often begins with a brainstorming session of all of the risk factors or dangers associated on a construction site. Falls, equipment malfunction, lack of training, language differences and loud noises are often among the first risks mentioned in his classes. He introduces another safety risk if it is not already addressed – complacent behavior.

When he discusses complacency on the work site with his students, he finds that the discussion is full of samples of this behavior, both in management generally and among the workers themselves. It is widely comprehended and accepted that construction is a risky and dangerous profession. The culture of the workplace in the construction industry historically has been that there is a risk, people are paid to take those risks and that accidents will happen. While this is true, there are approaches to battle complacency and reduce steadily the number of accidents, injuries and fatalities on a work site.

Additionally , as tools have made the work easier, there can be a complacency in working with these power tools. The general rule on a work site should be that although the tool is easy to use, it is important to use it safely. Conversations during breaks of the safety classes frequently include the horror tales of numerous accidents on sites, either those experienced or those observed.

There are several ways that construction site safety can be encouraged on a site. A recent study (2013) in Britain implies that using technology, specifically virtual reality safety training may possibly reduce the percentage of worker accidents in the future. Since most construction companies are not capable of take this step, there are others which may be more attainable. Some businesses have chosen to outsource and use safety instructors and have safety audits. This is often helpful in determining areas needing to be addressed along with to demonstrate the company’s concern because of their workers.

Other successful campaigns to increase safety on a construction site includes ranging from construction waste removal incentivizing an accident free team or project. This may be by giving bonuses, additional paid time off, or even having a drawing of some sort in which downline of an accident free team have the opportunity to win a big ticket item. Though some may express concern about adding to the company’s costs in incentivizing, it is important to realize that the extra cost to the company in lost time, workman’s comp, etc . are far more than the cost of a big screen tv or additional paid time off.…

Continue Reading →

How a Clean Construction Site Can Enhance Construction Safety

Making sure a construction site stays clean means that you are ensuring the safety of everybody that enters the construction area, as well as everyone that works on the site. Any debris that is left lying around could be a potential threat to someone’s safety and thus it is necessary that it should be cleared away as soon as possible. If the construction works with toxic materials and chemicals it is crucial that they must be disposed of properly. Not only wouldn’t it be ethically wrong to not do it, but in many cases it could be illegal. If they’re not disposed of properly they are going to become a threat to the others and the environment.

A construction site that is not clean and properly organized inhibits productivity. With random debris scattered around, workers will become confused and start searching for tools and materials in the wrong places. If a disorganised construction site causes injury to one of many workers it impacts productivity even more since that worker will no longer be a part of the workforce.

A disorganised construction zone will also have a negative effect on your reputation. Debris and other materials lying around, causing injury to others and affecting your productivity will all create the image of inefficiency and laziness. If you possibly could show others that you can maintain an organized workplace and that you care about the safety of others and the environment, they will be more likely to place their trust in you in order to find your work credible.

How to correctly clean up construction zones

There are numerous companies that offer construction site cleanup, but if you would like to complete it yourself here are a few basic tips:

Dust will build up every where during construction. Clean up dust using the following methods:
It’s important to wear masks during construction to avoid the dust entering your lungs.
If the construction took place in a home, make sure to clean any air filters such as your home’s heating and air conditioning as these filters will have trapped dust.
Remove dust on walls with a small wet towel and wrapping it around the beds base of the broom. Swipe it across the walls. Rinse the cloth frequently to stop dust from staying behind.
Vacuum any carpets and furniture.
Move large debris using trash cans or a larger container such as a dumpster if necessary. Many businesses rent dumpsters to construction sites so finding you ought to be easy.

Check most of the nooks and crannies to ensure no dust or other residue stays behind in your construction dumpster rentals.

Check to make sure that there isn’t any extra paint that needs to be removed.

If the construction area has interior masonry, make sure it is cleaned properly.

Clean any and all appliances that are present on the construction site.

Dispose of all trash and do a final check of the construction site to make sure it is precisely cleaned.…

Continue Reading →

Tips for Recycling Construction Site Debris

Construction site cleanup is an important aspect of all construction-related work if you think about the large quantities of waste products that are generated. Whether it is new structures that are being built or old structures being demolished, there is a lot of debris which has to be discarded in a careful manner. Construction site cleanup must be done in a way that is eco-friendly, safe, and cost-effective.

Although a large portion of the materials that are leftovers from a construction site are recyclable, they are still sent to landfills, which is a huge waste of valuable resource and materials. The best way to tackle this is to ensure that the recyclable materials are segregated from the nonrecyclable materials during a construction site cleanup.

There is any number of toxic waste materials that could be left behind in construction waste, so this must first be assessed. When old buildings are demolished, there is likely to be a large amount of toxic waste from paints that have lead and biocides containing mercury. There could also be fluorescent lamps containing mercury, leaded pipes, PCP ballasts, asbestos insulation, etc . In the construction of new buildings, the waste generated could be roofing tars, glue, solvent waste, paints and treated woods. These wastes should be segregated as toxic and nontoxic, and then as reusable and nonreusable. A door that has paint that’s lead-based could be reused, but if it were to be discarded, it would need to be classified as dangerous waste.

When a building that is being demolished has structures which can be of architectural or ornamental value, it is taken down and preserved carefully for sale or reuse. Doors and windows are regularly reused. Other materials which can be reused are carpets which may be recycled, gypsum board which is often used as an amendment for soil, and shingles which can be used for patching up roads. Cement blocks and bricks are also reused after mixing them with asphalt and concrete. This really is then used to form the inspiration for driveways and road beds. Wood lumber that’s untreated and unpainted can be utilized as dimensional lumber or used in composting and landscaping after being chipped. It’s also used for trail surfaces, soil amendment, and to prevent soil erosion.…

Continue Reading →

Four Reasons It Pays to Maintain a Clean Construction Site

When planning any construction project, it is important to plan the put up, completion of the project and cleanup of your website. When looking at cleaning up a construction zone it is important to address the final cleanup as well as the ongoing maintenance and cleanup needs that will be faced daily. There are numerous benefits of ongoing and effective construction site cleanup including: added safety onsite, greater productivity, a better reputation in your community and better cost savings per project.


An active construction yard is full of various dangers inherent to the nature of the job with scaffolds, ladders, electricity and heavy equipment. These factors combined with debris onsite which is not properly store or disposed of makes an already dangerous location much more. Materials not put away or disposed of collecting around your feet of workers creates an additional risk for tripping when carrying materials from destination for a place, the view of the ground can be obstructed, making the importance of this practice critical.


Just as mother always said, “A place for everything and every thing in its place, ” such is the guideline on an active construction site. Most useful case scenario is that workers spend time looking for materials which were not put in their proper place, wasting man hours. Worst case scenario in this situation is that the area becomes unsafe or causes an accident, spill, or casualty to a passerby.


Word of mouth is critical in just about any business and construction isn’t any exception. Cleanup of a website – both during the active phase as well as at completion is one area when the general public can see a measurable gauge by which to admire or disparage a construction company. With proper construction site cleanup practices, people gains a favorable opinion of your company and can recommend your services to others.

Financial savings

When employees are safe and productive, the time needed seriously to complete a project is decreased. Having a constant awareness of keeping your construction site cleaned up can lead to more profits for your company.…

Continue Reading →

Magnetic Sweepers – Making Construction Site Cleanup More Effective and Efficient

If you have ever visited a building or construction site, you understand that these areas are typically plagued by dangerous metal debris that will cause flat tires or personal injury. Responsible construction firms clean up their worksite areas at the completion of a job, so as to prevent high priced tire repairs and reduce steadily the liability risk that somebody could become injured.

Years back, the cleanup process often was a manual job, wherein each of the workers would scout the area, picking up all visible material, before moving forward to the next job. Not only was this method costly because it required a lot of time and labor, however it was also very ineffective. Particularly in rough terrain or grassy areas, it’s nearly impossible to spot every small piece of dangerous metal debris, and the factor of human error is usually quite high.

Today, many construction companies rely on magnetic sweeper tools to make the cleanup process faster and easier. With respect to the size of the job, magnetic sweepers for construction site cleanup can make a three or four-hour job into a 20 or 30-minute job. Furthermore, using a magnet to clean up metal debris is significantly more effective, because the magnet will pick up even those items of metal that may not be readily visible from an individual’s vantage point.

Roofing businesses frequently utilize magnetic sweepers for cleanup. Because commercial roofers use both nails and screws, a lot of which get dropped onto the business owner’s property below, it is necessary that the
commercial roofing company do a very thorough cleanup job before they leave the worksite. A magnetic sweeper is a tool attached to a long handle, much such as a push broom. At the beds base, magnetic strips pick up any lost nails or other metal debris from the floor. Some sweeper magnets feature wheels on each side so that they can be easily rolled over the ground.

Some sweeper magnets may also employ the addition of a rake-like attachment at the base, to grab any metal pieces which can be buried in the grass. Hand operated sweeper magnets can range in size from as small as 10 or 12 inches wide, to as large as 36 inches wide. Many roofing businesses will purchase multiple units so that, at the end of the afternoon, each worker takes one sweeper and goes over a tiny area of the yard, making the cleanup process faster and easier for everyone. Nails and screws that are picked up are able to be recycled and used the next day or at yet another job site.

For cleaning larger areas, such as scrap metal yards or parking lots, some firms will purchase large vehicle mounted magnetic sweepers. These units range in size from 48 inches to 72 inches wide and can be suspended by chains from the leading bumper of a vehicle. Some vehicle mounted sweeper magnets can also be hung from the forks of a skid loader, as well. These larger units are ideal for covering a large area in a quick amount of time. The important thing to bear in mind with any sweeper magnet is that if it’s moved within the ground too quickly, it will not be as effective at picking up magnetic debris. Most magnetic sweepers, particularly vehicle mounted ones, have maximum operating speeds that should be closely followed.…

Continue Reading →

Residential Construction Site Cleanup Checklist

The construction industry is a sizable and messy one. Even the smallest construction site can end with a large and daunting mess that needs to be cleaned up. In order to efficiently and effectively clean a construction site, follow this simple checklist to make sure nothing is left unclean. This checklist is a superb tool not only for small remodeling construction sites established by a homeowner but can be a valuable tool for the commercial cleaner who is hired to clean up a large-scale commercial mess.

Start first with general cleanup. In newly constructed homes, buildings, etc . clean and scrub the walls, ceilings, any installed appliances, trims, base boards, doors, mantels, windows, etc . Also make sure to dust well as the act of construction will build up reserves in dust in any nook and cranny it can. This dust if left to continue to amass can become detrimental to all around health if left unchecked. Check the tops and undersides of doors, hinges for dirt, debris of any extra paint that is leftover and make sure that it is removed. If interior masonry is existent in the construction site, make sure it is properly cleaned before proceeding. Vacuum or sweep carpets, hardwoods or tiled floors respectively, ensuring to remove any accidental paint splatter or any scuff marks. Wipe off faucets and knobs as well as any electrical switches. Then, one last item to check off your list of general cleanup is always to remove and dispose of any trash.

For other areas of construction sites, such as entries, exits and kitchens, special cleanup care is necessary. For all exits and entryways, take special notice to completely clean doors and hinges precisely so everything closes in how that it is designed to do so. For the exterior doors of a building or home with a porch or deck, sweep and clean those appropriately. Also including in an exterior construction site cleanup checklist is to completely pressure wash those areas as well as the driveway and garage spaces. If the construction site includes an outdoor patio, also pressure wash that site.

Kitchen construction cleanup requires most of the of the items on the typical construction site cleanup checklist but requires you to be aware of some special areas to wash unique to the kitchen space. Clean all kitchen appliances inside and out, this meaning the stove, refrigerator, oven, dishwasher, etc . Check around the appliances to where they either attach to the wall or counter tops to see if you need to remove any excess caulking or wipe clean of any leftover dust residue. Also, if the appliances are new, ensure that you remove any plastic packaging or labels.…

Continue Reading →