Metal Roof Materials

About Corrugated Metal Roofing

Many people can’t stand using corrugated metal roofing, regarding it as cheap roofing. A variety of different metal roofs sheets composed of vertical sheets and U formed cells of corrugated steel roofing are available. All these types of roofing usually have exposed nails and tend not to be fitted particularly beautifully around components like chimneys and skylights. The actual cut facets are commonly fixed using of tape or glues, and the metal which is used tends to be light gauge steel painted with low-cost paint. Roofs like these can begin to rust within just 10 to 15 yrs. This means competent metal roof contractors will reccommend  this material  be primarily utilized on short-term structures, like park properties or as outbuildings rather roofing for homes.

Steel Roofing


Steel is easily the most common and most affordable product formetallic roofing materials. Metal roofing is not the least expensive but, it can be an excellent option for roofing, since it is quite strong and long lasting. And even after years of wear it can be restored to better than new by a Houston metal roof repair contractor. Galvanized steel includes a good degree of protection from the organic material so it will not rust under regular environmental circumstances. A couple of approaches are used to galvanize steel. G-90 steel is very hot clear galvanized with a coating of zinc.

Galvalume or G-90

Galvalume is a substitute coating that offers the next stage of protection. It is composed of a mix of aluminum and zinc oxide. Both coatings can help avoid rusting effectively, and can usually permit steel roofs to last upwards of half a century. G-90 steel is made by dipping sheets or coils of metal in fluid zinc oxide, to ensure that a defensive level of 0.9 oz. or more of zinc is created. This covering can easily prevent the steel from being corroded or oxidized, which results in what is generally known as corrosion. G-90 steel is very well protected, even when it is lower or even scraped. Galvalume steel is really a better option for roofs that are exposed to a somewhat high sodium place such as in a marine environment. Even though G-90 steel gives superb security from the elements, which is also increased with a cool Kynar coat paint finish, it is not as effectively protected against the corroding components of salty oxygenation as galvalume metal.

Steel Doesn’t Do Well in Salt Air

Steel roofing is not necessarily ideal for the ocean locations because of higher power of sodium in the air. Even galvalume metal cannot fully prevent salty oxygen from eroding it, but it is able to protect it more effectively than G-90 steel. However if metal roofing is excessively exposed to regions rich in power of sodium up, such as within the salt water conditions, then steel may become oxidized and subjected to corroding. It is therefore not recommended to use of metal roofing services within the salt water areas.

Aluminum Is Resistant to Corrosion

Aluminum is another common material used in metallic roofing, even though it is not used as often as steel, mainly because of its higher cost. Numerous roofers would rather use steel roofing because it is cheaper, so it could be harder to locate someone who will set up aluminum roofing. Aluminum is of course resistant to corrosion and rusting. It can considered a good choice for roofing in parts which are subjected to salty air. Aluminum can also be lighter than steel, so it can be easier to deal with and install. Aluminum roofing may …

Continue Reading →

Why a Disaster and Recovery Plan?

A Perfect Example

Flooded Petco

When Tropical Storm Lee hit the Eastern Seaboard in September of 2010, there was massive flooding even in areas normally not affected by hurricanes.  One of those areas was Johnson City, New York, where a large number of animals died when flood waters overtook a local Petco because there was no disaster preparation and recovery plan. It’s impossible to plan for every contingency, but Johnson City is near a river; even if tropical storms are rare in the area, flooding is an ever-present danger whenever you’re situated near a water source.  If the store had had a better disaster preparation plan in place, then perhaps fewer—or no—animals would have died.  The community of Johnson City wouldn’t have been heartbroken and disgusted, and Petco wouldn’t have taken a huge hit to their corporate image.  This is why a good disaster and recovery plan is so necessary for both home and business owners.  In this article, we’ll explain the various ways that you can protect your property in case of water damage disaster.


It’s important for both business and home owners to have solid insurance coverage so that disaster recovery will not become a financial nightmare.  Homeowners in particular need to be aware of the fact that flood insurance is almost always separate from any other form of insurance; if you look carefully at your home owner’s insurance plan, then you’ll usually find that it specifically absolves the company of paying for flood damage.  This is, unfortunately, especially true of homes and businesses located in known flood-zones.  To protect yourself, make sure that you have separate flood insurance. It may be expensive, but because Austin water damage also leads to a need for mold remediation, it’s worth it. That’s additional disaster and expense you’ll have to deal with.

Plan of Action

As the events in Johnson City illustrated, you don’t just need to know what you’re going to do after a disaster has occurred; you also need to know what you’ll do before.  If you own a business, then you need to come up with comprehensive plans on how to get your employees and any animals on the premises to safety during a flood, fire, or another disaster—and you need to institute drills so that employees are familiar with these plans and can carry them out under pressure.  If you own your home, then you need to make sure that your family is prepared in case the electricity or water goes out. If you have pets or pomskies dogs you need to have a plan to take them with you when you evacuate. You’ll need to create a disaster kit and check it at least once a month so that you can replace items that may have expired. If the worst does happen, however, and you need help cleaning up water or fire damage, then you should contact a professional restoration contractor.  A professional restoration contractor can help you effectively clean up water damage Austin and can also perform smoke and fire repair, as well as mold remediation.  In the Central Texas area areas, they even offer emergency services.…

Continue Reading →